As an example the case of this time we will try to make a step by step logo TransTV in a very simple, less than 10 minutes. An example of a Logo that will be made like the image below
trans logo
Create a box in the work area by using the Rectangle Tool (which I've circled in red in the image below). In order for the width and height are equal press the Ctrl key on your keyboard while pulling down one corner of the diagonalnya. Big boxes to customize the course to your needs. The result looks something like the image below
Once that is done make again a box or click on the box that's been so above and press Ctrl + D to copy
Arrange so that the second box smaller size a little bit, so it looks like the image below
Adjust so that the small box right in the middle. So his position fits in the middle of the second selection box, use the Pick Tool (circled in red), and then on the keyboard press the letters C and E letter buttons. see the picture below
Still in a State of selected click on the Trim on the Toolbar (circled in red) so the box perforated in the Center. Make sure that the second shot is selected properly, otherwise the button Trim on the menu will not appear. If it clicks one time in a small box and then delete with the Delete button. (this little box is used only to hollow out a big box) Carefully remove them lest the two boxes joined erased.
After a small box to be deleted, click once on the image so that it appears eight arrow-like fruit below.
Next we will rotate the box. Set/navigate a pointer to one corner to a circular arrow appears as shown below.
Drag your mouse down until the box is rotated 45 degrees so that it becomes like the picture below (similar to ketupat well hehehe)
After that the image of a box again by using the Rectangle Tool and then place it above the image wave. Adjust the position of the placement is so exactly like the picture below. Don't forget to order for boxes and pictures ketupatnya fitting in the Middle, block all images and press the letters C and E alternately so that its position right at the core.
Next use the Shape Tool to select all of the pictures and then on the menu bar click the Trim as shown below (circled in red).
After the Trim button on click, a box will crop the image wave so that the result exactly as the picture below. Please delete the box that used the cut because it was not needed anymore
Create again a little box using the Rectangle Tool (circled in red) and then set up his position at the top of the wave pictures already cut last exactly like the picture below
Continue with selecting all images using the Shape Tool and then click the Weld like in the image below (circled in red)
When the result will be as shown below, a small box of yesteryear are already fused with an image using the wave function of the Weld. Consider the corner next to the top and bottom on the logo image. Still seems pointy right? Cut the course by using the function Trim. Can it be right?
After the cut ends will look like the image below. Both ends have already looked to be blunt.
How to make a logo transtv
We will now add a logo in the middle of a TRANCE writing. Use the Text Tool to create a caption, set the fonts using Arial then tebalkan. Place the position of writing the exact middle of the TRANS. see images below
The last give young blue colour on the image using the Toolbar Color in addition to the right. Click one by one and then click the desired color so that the results are as shown below.
trans tv logo
In order for the Logo image look more realistic, remove the black lines on the outskirts of the logo using the Outline Tool as in the picture below
transtv logo
To save the logo image in the formats jpg, gif, png or any other format please see posts ago.
Finally finished our tutorials as well this time. We will discuss the Intersect function on the next article.
0 Komentar